The Nautilus Mini is made of stainless steel and Pyrex glass, and uses the Aspire Nautilus BVC coil atomiser. The BVC coil technology is designed to last longer while continuing to give the cleanest and purest flavour from your E-Liquid. Coming equipped with a four-port airflow system that allows the user to adjust the draw, warmth of vapour and the amount of vapour produced. The mini component of this design allows for easy carry, installation and refilling.
Dimensions and Specifications
Airflow Hole Size
Nautilus Mini Exploded View
Nautilus Mini Assembly
Screw the upper hardware to the Pyrex Tank, making sure NOT to over tighten.
Screw the BVC Atomiser/Coil into the bottom hardware, make sure the BVC atomiser is screwed on and in place.
Screw the upper hardware to the botton hardwhere, the atomiser screws onto the inner airflow shaft in the centre.
Insert the drip-tip into the upper hardware.
Nautilus Mini Tank Filling
Check the upper hardware is screwed tightly onto the glass.
Screw the bottom hardware off the uppware
When you screw the bottom hardware off, the atomiser should be screwed onto the bottom. If the atomiser remains on the inner airflow shaft when you unscrew the bottom hardware, remove the atomiser from the airflow shaft and screw it into the lower hardware base to avoid disconnecting.
Contents of kit
1 x 2ml Nautilus Mini Tank 2 x Replacement Nautilus BVC 1.8ohm coil. (One is pre-installed) 1 x eGo threaded cone 1 x User Manual
Depending on how many cigarettes you smoke,we recommend using the following strength e-liquids with this kit: